Skip to main content
search

Client Questionnaire

    Contact Information

    Your name (required)

    Company name

    Address 1
    Address 2
    City
    State
    ZIP

    Phone
    Ext

    Fax

    Email (required)

    This Project Information is for a

    To complete our quote form, please scroll down to the project information pertaining to the project you just specified above.

    DC Drive Project Information

    If you currently have a DC Drive enter the information below.
    Volts AC
    Phase
    Hertz

    Current in AMPS
    Volts DC Armature
    Current DC Armature in AMPS

    Motor Information

    Make
    Horse Power
    Frame Size

    RPM
    Voltage Armature
    Armature Current in AMPS

    Type:
    Shunt WoundCompound WoundSingle QuadrantFour Quadrant ( Regenerative )Dynamic Breaking Required
    Other state

    Standard Field or base speed only

    Field Voltage DC
    Field Current in AMPS

    Field Weakening or spillover or extended speed range

    Starting Field Current
    Reduced Field Current
    Base speed in RPM
    Maximum Speed in RPM

    For this section there must be a speed feedback device

    Speed Feedback
    Volts/1000 RPM
    IP Number

    Encoder
    Pulses per rev
    Operating Volt
    Quadrature
    Other State

    Blower Motor

    Volts AC
    Phase
    Current in AMPS
    Thermostat or thermistor

    AC Drive Project Information

    If you currently have a AC Drive enter the information below.

    Volts AC
    Phase
    Hertz
    Current in AMPS

    Motor Information: (Must be a 3 Phase motor for AC Drive use.)

    Make
    Horse Power
    Frame Size
    Base Speed RPM

    Voltage
    # of Poles
    Volts Per Hertz
    Max Speed In RPM

    Type:
    PWM (Pulse width modulated, sine coded PWM)
    VVI (Variable voltage Inverter or 6 step)
    CSI (Current Source Inverter)

    Operating Requirements

    PWM (Pulse Width Modulated)
    Open Loop Vector
    Flux Vector (This option must have encoder feedback)

    Dynamic or regenerative breaking required
    Dynamic Breaking RequiredRegenerative breaking required

    Load Requirements

    Variable Torque (Fan or Pump application)
    Constant Torque (On some type of machine)
    Other

    Speed Feedback

    Encoder
    Pulses per rev
    Operating Volt
    Quadrature
    Other State

    Blower Motor

    Volts AC
    Phase
    Current in AMPS
    Thermostat or thermistor

    Close Menu